123 adhesive (blue)
123 adhesives, as their name suggests, are adhesives that dry quickly after use. In cases where speed is important, these adhesives are widely used. 123 adhesives are also known among people by names such as drop glue or instant glue.
123 adhesive was initially introduced in 1958 worldwide. The material used to make this adhesive is cyanoacrylate, which was previously used in various industries. These adhesives are typically composed of two parts. One part is the adhesive liquid, and the other is the drying spray, which should be applied to the adhesive-soaked area after use.
technical specifications
Density |
1.05+-0.01 g/ml |
Flashpoint |
81 c |
Bases |
Ethyl-Cyanoacrylate |
Compression Strength |
20c 28.5 kg/cm2 60c 12.5 kg/cm2 80c 8.5 kg/cm2 120c 6.5 kg/cm2 |
Power of breaking potential |
45 kg/cm2 |
Vulcanization speed |
3 minutes |
Package color |
Blue |
Gel weight |
80 gr |
Spray volume |
400 ml |
product usage
This adhesive can be used to connect the following surfaces and get the desired result:
- MDF wood surfaces
- Plastic surfaces
- Metal surfaces
- Chipboard wood surfaces
- ceramic
- Rock
- electronic circuits
- Sheet covers
- And …
how to maintain
This product should be stored in a warehouse away from moisture and on wooden pallets with a maximum of 4 cartons in height and at a temperature of +5 to +40 degrees Celsius.
Safety tips:
1. The gas emitted from the accelerator spray is slightly toxic.
2. Try to use this glue in spaces that have proper ventilation.
3. Do not smoke while using this product.
4. Do not store the glue at a temperature of 50 degrees and above and in sunlight.
5. Do not throw the glue or container on the fire even after it has been emptied. And do not pierce.
6. As much as possible, avoid the contact of the drip adhesive with the skin and eyes.
7. In case of contact with eyes, rinse immediately with plenty of water; And go to the doctor immediately.
8. The drying operation of this adhesive is a heat reaction. Therefore, it is normal for your skin to warm up due to contact with it.
How to use
1. Thoroughly clean the surfaces you want to stick So that they are free of any moisture, stains, or dust.
2. Apply the connection accelerator spray to one of the surfaces. At this stage, you have to wait a while for the spray to dry.
3. Now dip the other surface with 123 glue.
4. Place both levels on top of each other.